192.168.0.l & IP Address – What Is Difference?

      Comments Off on 192.168.0.l & IP Address – What Is Difference? is the most commonly used IP address with Netgear and D-link routers. These are two favorite brands which manufacture a wide variety of routers that are used all over the world. Thus, by entering the, you will access the router’s initial setup page. By using the same IP address, the network issues will be identified.

Private IP address is a private IP address. It is defined by The Internet Assigned Numbers Authority (IANA). There are certain pre-defined ranges of IP addresses. They are used on a local network or a single machine to perform specific tasks. There is the difference between 192.168.0.l and The former is an invalid code since each block should be filled with numbers only. It should not be filled with alphabets. Hence, ip address 192.168.0.l it’s not good.


If you assign a private  IP address to your computer, it will not be able to connect to the internet. On the other hand, a network device will fail to identify a computer or network device which manages private IP address. To give access to computers and networks devices that are under the mask of private IP address, they should go through the router connection so that Network Address Translation (NAT) will be implemented. Thus, network devices will have another layer of protection.

Benefits of using

There are many tasks which can be completed by using the IP address. It is the default IP address of some routers such as Netgear and D-Link. Some routers use and as default IP addresses to access the configuration page.

When you get access to the router page, it is possible to configure the router as per your needs. The initial settings will be done by using the IP address. You will also be able to reset the Netgear router by using the same IP address. The IP address is used to connect the router to the internet. It is possible to choose security settings as well. All the network administration functions will be performed in this context.

If your router implements as the means to the access the homepage of the router, you will want to enter the ‘username’ and ‘password’ in the router login page. You can find the default username and password in the manual supplied by the manufacturer.

The popularity of the IP address, has increased due to the selection of the same as the default IP address of the routers manufactured by most of the reputed companies. Only one single device can acquire the address

Wireless setup

You will want to use the IP address, to configure your router for wireless access. The internet and other services can be shared with the router through the router configuration. The IP address can be allocated to each and every network device so that there will not be any conflict. The transfer of data will take place among the networked devices in an effortless manner.

When you access the router setup page, you will be able to make changes to the wireless security mode as well. The SSID, which is also called as network name, can be changed when you have access to the router page.

More about

Most of the private networks use local IP address space, 192.168.0.x. The number ‘x’ varies from one device to another device. The number of IP addresses which can be served will be in between 1 and 254. If you are facing any network issues, you should want to check the IP address, IP Subnet Mask, starting IP address and ending IP address.

If your router’s IP address is, you can use the router as DHCP (Dynamic Host Configuration Protocol) server and the starting IP can be set to, and the ending IP address can be set to

You can go through RIP (Router Information Protocol) to exchange routing information with other routers. You will also be able to choose the controls to send and receive RIP packets in a very efficient way. You will be able to assign IP, DNS Server and Default Gateway addresses to all other computers by using the DHCP server.